background image

Trimming Instructions

1.   Extension cord. 

Always keep the extension cord behind the pole 

hedge trimmer and away from the trimming operation. Never drape it 

over a hedge being trimmed. If you cut or damage the cord, unplug 

it at the mains electrical outlet immediately. It must be repaired by an 

electrician or a power tool repairer before being used again.

2.   Working position.

 Maintain proper footing 

and balance and do not overreach. Wear 

safety goggles, non-slip footwear and rubber 

gloves when trimming. Hold the pole hedge 

trimmer firmly in both hands before turning 

the pole hedge trimmer on. Always hold the 

pole hedge trimmer with one hand on the 

rear handle and one hand on the adjustable 

auxiliary handle.

3.   Trimming new growth.

 

Using a wide sweeping 

motion, feed the blade teeth 

through the twigs. A slight 

downward tilt of the blade, 

in the direction of motion 

gives the best cut.

Note: 

Do not use the pole hedge trimmer for cutting stems greater than 

18mm. Use the trimmer only for cutting normal shrubbery found around 

houses and buildings.

Switching on/off

For your safety, the Pole Hedge Trimmer is designed with a two button 

safety switch. If only one switch is squeezed, the tool will not operate.

1.   Hold the Pole Hedge 

Trimmer with both hands, 

and away from your body.

2.   Depress the lock-off switch and 

squeeze the on/off button.

3.   To turn the Pole Hedge Trimmer 

off, simply release the on/off 

button.

Blade brake

The Pole Hedge Trimmer is fitted with a motor brake which will stop the 

cutting blade within 1 second of releasing the on/off button.

Note:

 There may be some sparking (or flashing) in the area of the 

motor ventilation slots when the pole hedge trimmer is switched off 

and the blade brake engages. This is normal and will not damage the 

machine.

PHT- 410

5.  TRIMMING

15°

15°

WARNING!:

 FAMILIARISE YOURSELF WITH 

SURROUNDING HAZARDS SUCH AS POWER 

LINES, PHONE LINES, METAL FENCES AND OTHER 

OBJECTS THAT COULD BE IN YOUR TRIMMING PATH, 

FAILURE TO DO SO COULD RESULT IN ELECTRICAL 

SHOCK, PERSONAL INJURY OR DAMAGE TO YOUR 

POLE HEDGE TRIMMER.

WARNING!:

 FAMILIARISE YOURSELF WITH 

SURROUNDING HAZARDS SUCH AS POWER 

LINES, PHONE LINES, METAL FENCES AND OTHER 

OBJECTS THAT COULD BE IN YOUR TRIMMING PATH, 

FAILURE TO DO SO COULD RESULT IN ELECTRICAL 

SHOCK, PERSONAL INJURY OR DAMAGE TO YOUR 

POLE HEDGE TRIMMER.

WARNING!:

 NEVER USE THE POLE HEDGE 

TRIMMER WHEN STANDING ON A LADDER OR 

UNEVEN GROUND.

CAUTION!:

 TO REDUCE THE RISK OF ELECTRIC 

SHOCK, WE RECOMMEND THE USE OF A RESIDUAL 

CURRENT DEVICE (RATED AT 30MA OR LESS).

Summary of Contents for PHT-410











Reviews: