MAINTENANCE cont.
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landfill and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
Limited spare parts are available subject to availability. Please
contact your local Bunnings Special Orders Desk to order the
required spare parts.
Most common spare parts listed below
Spare Part
Part No.
Single Eye Shield & Bracket Assembly SPOZWDBG250-51
Tool Rest Assembly
SPOZWDBG250-43A
Left hand threaded nut
SPOZBG150-43
Right hand threaded nut
SPOZBG150-21
Rubber foot Pack of 4
SPOZBG150-34
Switch
SPOZBG150-32
Wheel flange
SPOZBG150-18
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
SPARE PARTS
4. GENERAL MAiNtENANcE
V
Volts
Hz
Hertz
~
Alternating current
W
Watts
/min
Revolutions or
reciprocation per minute
n
o
No load speed
Regulator compliance
mark
Ø
Diameter
Warning
Wheel dressing
Dressing a wheel is done to renew sharpness or to true up the face of
a wheel.
A build up of metals and dirt will become embedded in a wheel as it is
used. Use a wheel dressing tool (not supplied) to clean wheels. This
will also improve the bench grinder’s performance.
Note:
New wheels sometimes require dressing to true up their face.
Cleaning and lubrication
Use only mild soap and a moist cloth to clean the tool. Never let
any liquid get inside the tool; never immerse any part of the tool into
a liquid. Self lubricating bearings are used in the tool and periodic
lubrication is not required.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by repairing of the bench grinder by an unauthorised
person or by mishandling of the tool.
