MAINTENANCE
DESCRIPTION OF SYMBOLS
Cleaning
Clean the appliance regularly with a damp cloth. Do not use
cleaning agents or solvents; these may be aggressive to the plastic
parts in the appliance. Ensure that no water can get into the
interior of the appliance.
Storage
Remove the power cord from the mains supply and allow the tool
to cool completely. Allow the sponge to dry completely before
storing.
Solder, spare tips and the sponge
can be stored in the drawer
compartment of the work station.
Store it in a dry location which is not accessible to unauthorised
persons.
Power Supply
If the supply cord is damaged, it must be replaced by a qualified
electrician in order to avoid a hazard.
WARNING!
BEFORE CLEANING YOUR TOOL OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE IT IS DISCONNECTED FROM THE POWER
SUPPLY TO PREVENT INJURY AND/OR ACCIDENTS.
Wear eye, ear & breathing
protection
Warning
Regulatory Compliance Mark
(RCM)
V
Volts
Hz
W
Hertz
~
s
°C
Alternating Current
Watts
Seconds
Degrees Celsius
Read Instruction Manual
Power tools that are no longer usable should not
be disposed of with household waste but in an
environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and
raw materials. Reuse of recycled material decreases
pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council
authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your
local Bunnings Warehouse.
For further information, or any parts not listed here,
visit www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
a.
b.
