6. ACCESSORY CARE
MAINTENANCE
DESCRIPTION OF SYMBOLS
Cleaning
1. Clean the insulation of the jumper leads with a soft, damp cloth.
Do not use any aggressive cleaners, brushes with metal or nylon
bristles, sharp or metallic cleaning utensils such as knives, hand
scrapers or the like. Do not submerge the jumper leads into
water or solvents at any point. Use a dry cloth to clean the metal
contacts.
WARNING!
DO NOT WET METAL CONTACTS.
WARNING!
MAKE SURE THE JUMPER LEADS ARE
DISCONNECTED BEFORE CLEANING.
2. Use a lint-free cloth to dry the jumper leads.
Storage
1. Keep the jumper leads in the supplied carry bag when not in use to
protect them from moisture.
2. Store the jumper leads in a clean, dry area such as the boot of your
car.
Note:
Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the tool by an unauthorised person or
by mishandling of the tool.
V
Volts
A
Amperes
L
Litres
mm
Millimetres
Metres
Warning
Read instruction manual
m
Power tools that are no longer usable should not be
disposed of with household waste but in an environmentally
friendly way. Please recycle where facilities exist. Check
with your local council authority for recycling advice.
Recycling packaging reduces the need for landfill and raw
materials. Reuse of recycled material decreases pollution in
the environment. Please recycle packaging where facilities
exist. Check with your local council authority for recycling
advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
