3
ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
Your Metal Cut-Off Saw is used for cutting steel such as pipe, box
section, rectangular, angle iron and steel bars. The saw can cut at
angles from 0 to 45º left & 0 to 15º right, it features a three position
fence that permits an extended cutting range. The quick release vice
allows fast adjustment whilst the lock-off button prevents accidental
operation. It is intended for DIY use only.
Adjusting the vice
WARNING!
ENSURE THAT THE VICE SECURING
BOLTS AND VICE ARE FIRMLY TIGHTENED BEFORE
USE TO PREVENT THE WORKPIECE MOVING AND
RISK OF PERSONAL INJURY.
The vice can be
adjusted quickly by
lifting the quick release
vice lock and pushing
forward or pulling back
on the vice handle.
1. Place your work
piece in between the
fence and vice.
2. Lift the quick release
vice lock and push
the vice forward.
3. Once the vice hits the work piece push
down the quick release vice lock.
4. Rotate the vice handle in a clockwise
direction to secure the work piece in
position.
5. To remove an object from the vice,
rotate the vice handle in an anti-
clockwise direction until the vice jaws
are loose. The work piece can now be
removed.
Note:
The quick release vice lock cannot be lifted until the vice jaws
have been loosened.
1. Vice handle
2. Lower guard
3. Cut-off wheel
4. Upper guard
5. Carry handle
6. Rubber feet
7. Lock-off button
8. Trigger switch
9. Main handle
10. Spindle lock button
11. Lock down pin
12. Depth stop
13. Base
14. Fence
15. Vice
16. Quick release vice lock
17. Hex Key Storage
18. Hex Key
METAL CUT-OFF SAW
KNOW YOUR PRODUCT
1. ADJUSTMENTS
SETUP & PREPARATION
1
7
8
2
3
4
5
WARNING!
ENSURE THAT THE TOOL IS TURNED
OFF AND DISCONNECTED FROM THE POWER
SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
6
9
10
11
12 13 14
15 16
