ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Turn the trimmer upside
down and place the safety
guard over the cutting
head.
3. Align the edging wheel
with the screw holes at
the underside front of the
safety guard and secure
with the remaining supplied
screws.
2. Rotate the guard into the
correct position and secure
with the supplied screws.
1. Secondary Handle
2. Locking Knob
3. Edging Guide
4. On/Off Trigger
5. Rotating Head Collar
6. Telescopic Shaft Collar
7. Telescopic Shaft
8. Cord Retainer
9 Main Handle
10. Head Angle Release Button
11. Edging Wheel
12. Cutter Head
13. Safety Guard
15. Assembly Screws
x 4
LINE TRIMMER
ACCESSORIES:
KNOW YOUR PRODUCT
1 2 3
4 5 6
8
7
14
1. ASSEMBLY
SETUP & PREPARATION
Fitting the Safety Guard
WARNING!
ENSURE THE TOOL IS DISCONNECTED FROM
THE POWER SUPPLY BEFORE PERFORMING ANY OF THE
FOLLOWING OPERATIONS.
WARNING!
NEVER USE THE LINE TRIMMER UNLESS THE
SAFETY GUARD IS PROPERLY FITTED AND SECURED.
1. Place the adjustable
handle onto the line
trimmer so that the holes
align.
3. Rotate the handle into the
most comfortable position
and tighten the locking
knob.
2. Pass the bolt through the
handle and screw the
locking knob loosely onto
bolt.
Fitting the Secondary Handle
9 10
13
12
11
