BATTERY & LASER LINE SAFETY WARNINGS
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR
TOOL AND BATTERY
•
DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed
40ºC (such as inside sheds or metal buildings in summer).
•
Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery
can explode in a fire.
Additional safety instructions for laser lights
The laser light/laser radiation used in the Ozito 360 Laser Line LLT-3600U laser is Class 2 with maximum
1mW and 650nm wavelengths. These lasers do not normally present an optical hazard, although staring at
the beam may cause flash blindness.
WARNING!
Do not stare directly at the laser beam. A hazard may exist if you deliberately stare into
the beam. Please observe all safety rules as follows:
•
The laser shall be used and maintained in accordance with the manufacturer’s instructions.
•
Never aim the beam at any person or an object other than the work piece.
•
The laser beam shall not be deliberately aimed at personnel and shall be prevented from being
directed towards the eye of a person for longer than 0.25s.
•
Always ensure the laser beam is aimed at a sturdy work piece without reflective surface’, i.e. wood or
rough coated surfaces are acceptable. Bright shiny reflective sheet steel or the like is not suitable for
laser use as the reflective surface could direct the beam back at the operator.
•
Do not change the laser light assembly with a different type. Repairs must only be carried out by a
power tool repairer.
Caution:
Use of controls or adjustments or performance of procedures other than those specified herein
may result in hazardous radiation exposure.
