LLT-3600U
Using the Auto-Levelling Function
Disabling Auto-Levelling feature to Create an Angled Line
1 Turn laser on or off by pressing
the on/off button at the top of
the unit.
2 Press the auto-levelling
switch up into the on
position and then press
the operating mode
button to achieve the
desired mode.
Note:
Ensure the laser is
level on tripod.
2 Turn the unit on using
the on/off switch,
ensuring that the auto-
levelling switch is in off
position. Press the on/off
operating mode button
until desired laser more
achieved.
Note:
The indicator light will
glow red, indicating
the auto-levelling
feature is in-active.
Note:
Laser can also be turned
on, in auto-levelling mode
by using the auto-levelling
switch.
A red light shown at the top of the unit will indicate that the unit is
auto-levelling is turned off, or at an angle out of auto-levelling range.
A green light indicates the auto-levelling switch is turned on and
operating correctly.
1 Attach the laser to the tripod
and adjust the tripod to the
desired height, angle and tilt.
