2. WALL MOUNT BRACKET
3. CONTROLS
OPERATION
Switching On and Off
Spirit Levels
Magnetic Mounting
A wall mount bracket is included with your laser level to allow you to
attach to a wall using a screw or nail, or to a tripod with a 1/4” thread.
1 Attach the mounting bracket
to a wall using a screw or nail,
or attach to a tripod with a 1/4”
thread.
1 To turn the Line Laser on,
push the on/off switch to the
left.
The laser unit has 2 operation modes; a Line Laser or a Point Laser.
The laser level has 2
perpendicular spirit levels to allow
you to check if the unit is perfectly
horizontal or vertical.
The laser unit has magnets at the
rear to allow mounting to metal
surfaces.
2 To turn the Point Laser on,
push the on/off switch to the
right.
3 To turn the laser unit off, push
the on/off switch into the
middle.
3 Use the dial on the bracket to
adjust the height.
2 Place the back of the laser
level onto the metal plate of
the bracket with the magnets
on the rear of the unit.
LINE
LASER
POINT
LASER
OFF
WARNING!
ENSURE LASER WINDOW IS NOT AT
EYE LEVEL OR DIRECTED TOWARDS OTHERS
WHEN OPERATING.
