ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
8 AAA Battery x 2
9 Wall Mount Bracket
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. INSTALLING BATTERIES
1 Point Laser
2 Battery Compartment
3 Rear Magnets
4 Vertical Spirit Level
5 Sliding On/Off Switch
6 Horizontal Spirit Level
7 Line Laser
LASER LEVEL
ACCESSORIES
1
4
5
6
7
8
9
2
3
The Laser Measurer unit requires 2 x AAA batteries to operate.
1 Remove the battery
compartment lid from the back
of the laser unit using the tab.
3 Place the side of the battery lid
into the recess in the laser unit
and push the lid tab down to
secure in place.
2 Insert 2 x AAA batteries in
the correct direction indicated
by the embossing inside the
battery compartment.
WARNING!
BEFORE INSTALLING BATTERIES, ENSURE
THE UNIT IS SWITCHED OFF TO PREVENT THE LASER
FROM OPERATING.
