ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
KNOW YOUR PRODUCT
SETUP & PREPARATION
1. BATTERY
1 Keyless Chuck
2 Torque Adjustment Collar
3 LED Light
4 Variable Speed Trigger
5 Battery 18V
6 Battery Release Button
7 Forward/ Reverse Lever
8 Gear Selector
CORDLESS DRILL DRIVER
Installing and Removing
2. Slide cradle onto the battery.
Only the red light will be
illuminated when properly
connected and charging.
Slide the battery into the drill
base until it clicks into place.
This charger is recommended for use with a residual current
device with a rated residual current of 30mA or less.
1. Plug charging jack into
charging cradle. Both
lights will illuminate when
connected.
Charging
Hold down the battery release
buttons and slide the battery
out.
9 Charging Jack
10 Charging Adaptor
11 Charging Cradle
12 50mm Screwdriver Bit
13 Steel Drill Bits x 5
14 Wood Drill Bits x 5
Battery Indicator
1. Depress the battery
indicator button.
2. Observe which lights illuminate for a reading on your battery’s
charge.
Charged
Flat
Low Charge
Note:
Once fully charged, both the red and green lights will
illuminate.