ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
ON
STOP
INVERTER WELDER
1 Welding Current Control
2 Power On LED
3 Thermal Overload LED
4 Negative Output Terminal
5 Positive Output Terminal
6 Carrying strap
7 Power cable
KNOW YOUR PRODUCT
1. ASSEMBLY
ON
STOP
ON
STOP
3 Install thin (uncoated)
end of Electrode into the
arc electrode holder.
4 Attach the Earth Clamp
to the work piece
ensuring area is free
from paint or dirt so that
there is a good electrical
connection.
2 Attach Earth Clamp lead
to the NEGATIVE (-)
output terminal. Insert &
rotate until connection is
firm.
8 Cable with electrode holder
9 Cable with ground terminal
SETUP & PREPARATION
1 Attach Arc Electrode
Holder lead to the
POSITIVE (+) output
terminal. Insert & rotate
until connection is firm.
5 Connect the Inverter Welder
power cord into a power outlet.
Before starting you will require a suitable Electrode according to the
specific material type and thickness.
1
2
3
4
8
6
5
9
7
WARNING:
ENSURE THE TOOL IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING STEPS.
WARNING:
DO NOT TOUCH THE ELECTRODE WHILE
THE WELDER IS ON.
NOTE:
AVOID THE USE OF EXTENSION CORDS.
NOTE:
FULLY INSULATED LOCK-TYPE CONNECTORS
SHOULD BE USED WITH THE INVERTER WELDERS OUTPUT
TERMINALS.