2. SANDING BELT & DUST EXTRACTION
3. ROTATING FILE ARM
2 Press the dust adaptor onto
the rotating file arm so that
the tabs on the adaptor clip
over the arm.
1 Push the front belt
roller towards the
body of the tool, until it
clicks into place.
2 Remove the sanding
belt from the rollers
1 Align the dust
extraction adaptor with
the belt tensioning
button.
The dust extraction adaptor allows you to connect a vacuum hose to
remove dust and debris from the working surface as you operate.
Note:
Before attaching the dust extraction adaptor, you must first fit the
sanding belt.
3 Attach a dust hose onto the end of the dust extraction adaptor.
a
b
Removing the Sanding Belt
Fitting the Dust Extraction Adaptor
2 Adjust the angle of the rotating file arm to the desired position.
1 Screw the rotating arm
screw anti-clockwise
to allow the arm to
rotate
3 Secure in place by
rotating the rotating
arm screw clockwise.
Adjusting the File Arm Angle
