The scarifier depth is adjusted at both front wheels via the depth
adjustment knob.
1. Press and hold the lock-off
button.
To prevent accidental start up of the motor the scarifier aerator is
fitted with a dual action switch
WARNING!:
DISCONNECT THE SCARIFIER
AERATOR FROM THE POWER SUPPLY AND
ENSURE THE BLADE HAS STOPPED COASTING
BEFORE ADJUSTING THE DEPTH.
3. ADJUSTMENTS
Adjusting the Scarifier Depth
0
I
II
III
L
4. SWITCHING ON/OFF
CAUTION:
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
WE RECOMMEND THE USE OF A RESIDUAL CURRENT
DEVICE (RATED 30mA OR LESS).
2. Pull the Start/stop lever towards
the handle and hold in position,
the motor will now start.
3. Release the lock-off button
4. Release the Start/stop lever to
stop the motor.
1. Pull out the adjusting knob and
turn to the left or right into one
of the available positions.
2. Release the knob, check that
it is securely seated in the
required depth.
Cutting Depth Positions
0 - Transport position.
I - Scarifier depth 3mm.
II - Scarifier depth 7mm
III - Scarifier depth 9mm
WARNING!
THE ROLLER WILL STOP A FEW
SECONDS AFTER THE SWITCH HAS BEEN
RELEASED. BE AWARE OF THE NECESSARY TIME IT
TAKES FOR THE ROLLER TO STOP. DO NOT ATTEMPT
TO STOP THE ROLLER.
OPERATION
Note:
The scarifier depth must
always be identically set on both
sides.
0
I
II
III
L
Overload Protection
To protect the motor it is equipped with a thermal overload switch
which cuts out when overloaded and starts again automatically after a
short cooling-down period.
