TIMBER
Loosen
Tighten
4. APPLIANCE CARE
MAINTENANCE
DESCRIPTION OF SYMBOLS
WARNING!
BEFORE CLEANING THE APPLIANCE OR
CARRYING OUT ANY MAINTENANCE PROCEDURE,
MAKE SURE THAT IT IS DISCONNECTED FROM THE
POWER SUPPLY TO PREVENT ACCIDENTAL STARTING.
Power tools that are no longer usable should not
be disposed of with household waste but in an
environmentally friendly way. Please recycle where
facilities exist. Check with your local council authority for
recycling advice.
Recycling packaging reduces the need for landfill and
raw materials. Reuse of recycled material decreases
pollution in the environment. Please recycle packaging
where facilities exist. Check with your local council
authority for recycling advice.
CARING FOR THE ENVIRONMENT
SPARE PARTS
Spare parts can be ordered from the Special Orders Desk at your
local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: [email protected]
Warning
Read instruction manual
Caution: Wear ear protection
and safety goggles
Keep bystanders away. Do not mow whilst people
especially children or pets are in the mowing area.
Double insulated
Do not use on steep slopes.
Always keep the lawnmower on the ground when mowing.
Tilting or lifting the lawnmower may cause stones to be thrown out.
Beware of severing toes or hands. Do not put hands or feet near
a rotating blade.
Risk of cut injuries.
Caution: rotating blades
Switch Off! Remove plug from mains before adjusting, cleaning or if
cable is entangled or damaged. Keep the cable away from the blade.
Don’t use with rear flap open.
Make sure the lawn is clear of sticks, stones, wire and debris;
they could be thrown by the blade.
Sound power level
Do not mow in the rain or
leave the lawn mower
outdors while raining.
Volts
V
~
Alternating current
Hz
/min
Keep extension cord away
from cutting blades.
Hertz
Watts
No load speed
Regulator compliance mark
n
o
W
Revolutions or reciprocation
per minute
Removing the Blade
1. To remove the blade bolt, hold
the blade firmly and with a 13mm
socket (not supplied) loosen the
blade bolt by turning it anti-
clockwise.
Note:
A correctly positioned piece of
timber will assist in holding the blade
while removing or tightening the blade
bolt.
2. Remove the blade bolt and blade.
3. Inspect for damage and clean as necessary.
Replace the metal blade after 50 hours mowing or 2 years whichever is
the sooner – regardless of condition. If the blade is cracked or damaged
replace it with a new one. Never use a blade bolt if the insulated head is
damaged, cracked or missing.
1. Fit the blade to the fan with the tilt edges of the blade facing towards
the mower, ensuring the blade is located onto the two fan location lugs
correctly.
Note:
Due to the shape of the two location lugs, the blade can only be
fitted in the correct direction.
2. Re-assemble blade bolt through blade and fan.
3. Hold the blade firmly and tighten blade bolt turning in a clockwise
direction. Do not over tighten.
WARNING!:
ALWAYS HANDLE THE BLADE WITH CARE
– SHARP EDGES COULD CAUSE SERIOUS INJURY. USE
GLOVES.
WARNING!:
DO NOT TOUCH ROTATING BLADES.
Fitting the Blade
Ozito Industries will not be responsible for any damage or injuries caused by
repair of the tool by an unauthorised person or mishandling or mistreatment
of the tool. This tool is designed for Domestic Home Use only. Use in
commercial or industrial environments will void the warranty.
• Keep all nuts, bolts and screws tight to be sure the lawn mower is in a safe working
condition.
• Check the catcher frequently for wear or deterioration.
• Replace worn or damaged parts for safety.
• Only use the replacement blade, blade bolt, and impeller specified for this product.
• Be careful during adjustments of the lawn mower to prevent entrapment of the fingers
between moving blade and fixed parts of the machine.
• Oil the wheel pins.
• When not in use, the mower should be stored in a dry, frost-free location, out of reach of
children. If the housing of the mower requires cleaning, do not use solvents but a moist soft
cloth and brush only.
• Frequently check the wheel threads are firm and tight.
