Empty
Full
2. PREPARATION
OPERATION
2. To assemble the grass catcher
align the two halves and push them
together, one side at a time. Ensure
the two halves click together around
the entire middle section.
1. Assemble the grass catcher handle
onto the opening on the top half of
the grass catcher. The handle will
click into position when aligned and
fitted correctly.
Assembling the Grass Catcher
3. Assemble the grass catcher top onto
the bottom half of the grass catcher
assembled in step 2. Align the two
halves and push each individual
plastic lug into its opposite location.
Fitting and Removing Grass Catcher
3. To empty the grass catcher, lift the catcher flap with one hand then lift
the grass catcher with the other hand up off the two raised housing
clips.
The catcher must be attached to the two raised hooks on the mower.
1. Lift up the catcher flap with one hand
and guide the catcher over the two
hooks on the mower housing.
2. Lower the grass catcher in place and
lower the catcher flap. The catcher
flap is held against the grass catcher
by a spring.
WARNING!:
WHEN ASSEMBLING THE GRASS CATCHER
BACK TO THE MOWER AFTER EMPTYING, ALWAYS
ENSURE THERE IS NO BUILD UP OF GRASS IN THE GRASS
CHUTE. IF NEEDING TO CLEAR THE GRASS, ALWAYS ENSURE
THE MOWER IS DISCONNECTED FROM THE POWER SUPPLY
PRIOR TO CLEARING. A BUILD UP OF GRASS IN THE GRASS
CHUTE MAY PREVENT GRASS FROM MOVING INTO THE
GRASS CATCHER EFFECTIVELY.
Using the Cord Retainer
The cord retainer prevents the extension lead (not included) from being
disconnected during use. Only use Heavy Duty extension lead suitable for
outdoor use with electric garden tools, no longer than 25 meters.
1. Make a loop with the extension
lead (socket end of lead) through
the loop and secure over the
hook.
2. Once fitted, connect the lawn
mower power plug into the
extension lead socket.
The height adjustment lever provides 5 cutting heights from 20mm to
70mm.
WARNING!:
DISCONNECT THE MOWER FROM THE
POWER SUPPLY AND ENSURE THE BLADE HAS
STOPPED COASTING BEFORE ADJUSTING THE HEIGHT.
Cutting Height Adjustment
1. Pull the height adjustment lever away
from the mower body.
2. Adjust the lever to the desired cutting
height.
3. Release lever check that it is securely
seated in the required cutting height.
Grass Catcher Volume Indicator
To alert you that the grass catcher
is full, the mower provides a volume
indicator.
Indicator floats up when empty.
Indicator is down when full.
WARNING:
BE CAREFUL DURING CUTTING HEIGHT
ADJUSTMENTS OF THE LAWN MOWER TO PREVENT
ENTRAPMENT OF THE FINGERS BETWEEN MOVING HEIGHT
ADJUSTMENT LEVER AND THE MOWER HOUSING.
