1. Motor cover
2. Lifting handle
3. Lower handle securing knob
4. Lower handle
5. Upper handle
6. Start/stop lever
7. Handle grip
8. Height adjustment lever
9. Catcher flap
10. Upper handle securing knob
11. Grass catcher handle
12. Grass catcher
13. Volume indicator
14. Upper handle securing set
ELECTRIC MOWER
KNOW YOUR PRODUCT
1. ASSEMBLY
SETUP & PREPARATION
1
2
3
4
5
6
7
8
13
9
10
WARNING!
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
Fitting the Lower Handle to Mower Body
1
. Align and then fit the lower
handle in place to the mower
body on both sides.
1. Place the upper handle over the
upper ends of the lower handle.
From the upper handle securing
set, fit the bolts through the inner
side of the lower handle and then
through the hole in the upper
handle.
Note:
When you fit the upper handle
you can decide the height of the
upper handle by selecting the
appropriate fastening hole.
2. Secure in place by screwing the
supplied upper handle securing
knob over the protruding ends of
the bolts.
Fitting the Upper Handle to the Lower Handle
2. Fit and secure both sides in
place with the lower handle
securing knobs.
Ensure the cord follows the handle
smoothly from the switch to the body
of the mower.
Securing the Power Cord to the Handles
1. Secure the power cord from the
switch housing to the lower handle
as shown.
11
12
14
