![background image](http://html.mh-extra.com/html/ozito/dmm-080/dmm-080_instruction-manual_1666475008.webp)
7
ASSEMBLY
WARNING!
Always turn off the tool and disconnect from the power
supply prior to changing any accessories or making any handle adjustments.
Side Handle
The 3 position side handle (9) will provide additional
control, support and guidance when using the tool. The
side handle (9) can be assembled to the left, top or
right side of the metal gear casing (6). Align the thread
on the end of the side handle (8) with the
corresponding hole in the metal gear casing, screw the
side handle (8) clockwise till secured (Fig. 1).
Spade Handle
The rear spade handle (10) provides additional control
and support when using the tool. It can be attached
either horizontally, vertically or should you require it,
diagonally.
To assemble, place the rear spade handle (10) into the
locating boss at the angle you desire. Then, screw the
securing knob (11) clockwise into the recess to secure
the rear spade handle (10) (Fig. 2).
To change the angle simply loosen the securing knob (anti-clockwise), pull the
handle off the locating boss, replace the handle back into the locating boss at the
angle desired. Secure as previously described.
Mixing Paddle
Place the mixing paddle (8) at the opening of the
threaded collet (7). Carefully rotate the mixing paddle
(8) flush to the collet (7) and turn clockwise until tight.
Then by using the spanners provided hold the
threaded collet (7) in place whilst tightening the mixing
paddle (8) (Fig. 3).
Fig. 1
Fig. 2
Fig. 3
!!
Summary of Contents for DMM-080
Page 1: ......