2. CONTROLS
3. SHARPENING PROCEDURE
1. To turn on, press the on/
off switch into the “I”
position.
Turn the grinding stone
adjustment dial anti-clockwise
to lower the grinding stone.
2. To turn off, press the on/
off switch into the “O”
position.
Turn the grinding stone
adjustment dial clockwise to
raise the grinding stone.
OPERATION
Turning on/off
Grinding Stone Adjustment Dial
1. Ensure the drill bit that
requires sharpening is
in the smallest template
guide it fits.
2. Turn the drill bit sharpener
on.
3. Press down slightly
on the drill bit while
rotating the bit back
and forth between your
fingers.
4. Turn the drill bit sharpener
off, remove the drill bit and
examine the cutting edge
is sharp.
5. Rotate the drill bit 180º
and reinsert into the drill
bit sharpener.
180°
6. Repeat steps 2-5. Ensure that both sides of the drill bit are
sharpened for the same amount of time, using the same
amount of pressure.
