10
TROUBLE SHOOTING
SPARE PARTS
Limited spare parts are available subject to availability. Please contact your local
Bunnings Special Orders Desk to order the required spare parts.
Most common spare parts listed below
Spare Part
Part No.
Front Cap
SPDBR1500-001
Circlip 28
SPDBR1500-002
Slip Clamp Sub-assembly
SPDBR1500-004A
Switch
SPDBR1500-065
Speed Control
SPDBR1500-072
Brush Holder (Pair)
SPDBR1500-075
Carbon Brushes (Pair)
SPDBR1500-076
Brush Cap (Pair)
SPDBR1500-077
SDS Max Flat Chisel SPFCM001
SDS Max Pointed Chisel SPFCM002
Symptom
Solution
SDS max accessory is
falling out
Ensure that the accessory locking sleeve
has been fully retracted prior to
inserting the SDS max accessory
Not chiseling or low
breaking power
Tool temperature low
Too much grease packed into the gear box
Accessories not lubricated
Refer to insert or Cold Hammering section
for instructions on how to resolve this issue
A small amount of sparking
is visible through the housing
air vents
This is normal and does not indicate
a problem
Excessive sparking is visible
through the housing air vents
and/or the demolition
breaker is failing to operate
This may indicate the carbon brushes have
worn out and need to be replaced. Carbon
brushes should only be replaced by a
qualified electrician or power tool repairer.
DBR-1500 Manual.qxd 5/11/10 3:17 PM Page 11
