drill driVer operation (cont.)
11
General Hints for drilling in all materials
Always use sharp drill bits.
Mark the place where you would like the hole to be drilled.
Commence with a slow speed to start the hole (see section “Speed Control” for
directions on how to do this).
Reduce your pressure on the drill when the drill bit is about to break through
the material.
Wood drilling
Mark the place where you want to drill with a punch or a nail.
To avoid splintering on breakthrough, either clamp a piece of scrap wood to the
back of your workpiece or continue the hole from the back of the wood when
the drill bit first breaks through.
note:
The CDL-072 is not recommended for metal drilling.
led lights
The drill has 1 LED Light (6) built into the unit (Fig. 7).
The LED light (6) turns on automatically when you
depress the variable speed trigger (4).
The LED light (6) illuminates dark areas in tight
corners to assist with drilling and screw driving.
This helps achieve a more accurate result in your
workpiece.
1.
2.
3.
4.
1.
2.
1.
2.
Fig. 7
Summary of Contents for CDL-072
Page 14: ...DESCRIPTION OF SYMBOLS 13...
