Ozito CDL-072, Instruction Manual

Page: 10 / 16

preparation and Set-up (cont.)
9
Keyless chuck
The keyless chuck (1) on your drill enables easy
installation and removal of bits/accessories.
To open and close the keyless chuck (1), hold the
chuck collar (a) with one hand and rotate the chuck
body (c) with your other hand (Fig. 2).
The arrows on the chuck indicate in which direction
to rotate the chuck body in order to GRIP (tighten)
or RELEASE (unlock) the drill bit.
installing drill or driver Bits
WarninG! Do not hold the chuck body with one hand and use power of
the drill to tighten or loosen the chuck jaws. The chuck body could slip and
your hand could come in contact with a rotating accessory. This could cause
an accident resulting in personal injury.
Open the keyless chuck (1) to a point where the
opening is slightly larger than the drill or driver bit
you intend to use.
Insert the drill or driver bit into the keyless chuck (1),
ensuring the end of the drill or driver bit does not
touch the screw inside the keyless chuck (1) (Fig. 3).
Close the keyless chuck (1) onto the drill or driver
bit.
removing drill/driver Bits
note:
Do not handle drill bits without gloves as drill bits and other accessories are
sharp or can be hot after use, this can cause personal injury.
Loosen the keyless chuck (1) as described previously.
Remove the drill or driver bit from the keyless chuck (1).
1.
2.
3.
1.
2.
3.
1.
2.
Fig. 2
Fig. 3