ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Place the lower tube onto
the upper tube.
1 Release the handle lock to
allow the secondary handle
to rotate.
3 Feed the top of the
assembled tubes into the
blower housing first, then
squeeze the bottom to fit.
2 Secure the tubes together
with two 16mm screws at the
top and one 24mm screw
and nut at the bottom.
Note:
The nut will need to be
pushed into the recess
firmly to start the thread.
2 Rotate the handle to the
desired position and secure
in place with the handle lock.
4 Secure in place with the 2
remaining 24mm screws
and nuts.
1 Nose Guide Wheels
2 Lower Tube
3 Upper Tube
4 Secondary Handle
5 Shoulder Strap Hook
6 On/Off Switch
7 Collection Bag
8 Mode Selector Lever
9 Main Handle
BLOWER & VACUUM
ACCESSORIES:
KNOW YOUR PRODUCT
1
2
3
4 5 6
8
7
9
10 11
12
1. ASSEMBLY
SETUP & PREPARATION
Assembling the Tubes
Adjusting the Secondary Handle
10 Shoulder Strap
11 Assembly Screws x 5
(2 x 16mm & 3 x 24mm)
12 Patio Extension
WARNING:
ENSURE THE TOOL IS TURNED OFF AND
DISCONNECTED FROM THE POWER SUPPLY BEFORE
PERFORMING ANY OF THE FOLLOWING OPERATIONS.