![background image](http://html.mh-extra.com/html/ozito/bjk-1010/bjk-1010_instruction-manual_1666171007.webp)
7
BiScuit Joiner Safety WarninGS
disc cutters must be rated for at least the speed marked on the tool.
Disc
cutters running over rated speed can fly apart and cause injury.
always use the guard.
The guard protects the operator from broken disc cutter
fragments and unintentional contact with the disc cutter.
Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.
Cutting
accessory contacting a “live” wire may make exposed metal parts of the power tool
“live“ and could give the operator an electric shock.
this appliance is not intended for
use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety.
recommendations for the use of a residual current device
with a rated residual
current of 30mA or less.
using an extension lead
Always use an approved extension lead suitable for the power input of this tool.
Before use, inspect the extension lead for signs of damage, wear and ageing.
Replace the extension lead if damaged or defective.
When using an extension lead on a reel, always unwind the lead completely. Use of
an extension lead not suitable for the power input of the tool or which is damaged
or defective may result in a risk of fire and electric shock.
It is recommended that the extension lead is a maximum of 25m in length. Do Not
use multiple extension leads.