background image

MAINTENANCE

DESCRIPTION OF SYMBOLS

Cleaning

1.  We recommend that you clean the appliance immediately after 

you use it.

2.  Keep the safety devices free of dirt and dust as much as 

possible. Wipe the equipment with a clean cloth.

3.  Clean the appliance regularly with a damp cloth and some soft 

soap. Do not use cleaning agents or solvents; these may be 

aggressive to the plastic parts in the appliance. Ensure that no 

water can get into the interior of the appliance.

Cleaning The Spray Gun

WARNING! 

IT IS ESSENTIAL TO CLEAN THE SPRAY 

GUN THOROUGHLY AFTER EACH USE. FAILURE TO DO 

SO WILL CAUSE BLOCKAGES WHICH WILL PREVENT 

THE TOOL FROM WORKING & VOID THE WARRANTY.

If oil based paint was used, use a solvent such as turps 

for cleaning. If water based paint was used, use water for 

cleaning.

1.  Empty the paint pot of remaining material & fill with appropriate 

cleaning solution.

2.  Connect the spray gun to the air supply and spray the cleaner 

onto a scrap piece of cardboard. Repeat this procedure until the 

solution coming out of the gun runs clear.

3.  Disconnect the air supply.

4. Remove the paint pot and rinse until clean.

5.  Unscrew the nozzle. Dip 

a clean cloth in cleaning 

solution and use this to clean 

the nozzle parts and gun 

housing.

6.  Allow all parts to air dry completely before re-assembling.

Storage

Disconnect the air tools from the air hose and make sure that it is 

secured in such a way that it cannot be started up again by any 

unauthorised person. Store the tools in a dry location which is not 

accessible to unauthorised persons.

Note: 

Ozito Industries will not be responsible for any damage or 

injuries caused by the repair of the tool by an unauthorised person 

or by mishandling of the tool.

WARNING! 

BEFORE CLEANING THE APPLIANCE OR 

CARRYING OUT ANY MAINTENANCE PROCEDURE, 

MAKE SURE THAT IT IS DISCONNECTED FROM THE 

POWER SUPPLY TO PREVENT ACCIDENTAL STARTING.

Warning

Wear eye, ear & breathing 

protection

mm

MIllimetre

psi

Pounds per square inch

L

L/min

Litres

Litres per minute

Read Instruction Manual

Power tools that are no longer usable should not 

be disposed of with household waste but in an 

environmentally friendly way. Please recycle where 

facilities exist. Check with your local council authority for 

recycling advice.

Recycling packaging reduces the need for landfill and raw 

materials. Reuse of recycled material decreases pollution 

in the environment. Please recycle packaging where 

facilities exist. Check with your local council authority for 

recycling advice.

CARING FOR THE ENVIRONMENT

SPARE PARTS

Spare parts can be ordered from the Special Orders Desk at your 

local Bunnings Warehouse. 
For further information, or any parts not listed here, visit  
www.ozito.com.au or contact Ozito Customer Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

Summary of Contents for ATAK-009







Reviews: