ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1 Spindle Lock
2 Adjustable Safety Guard
3 Side Handle
4 Lock-Off Slide Switch
5 On/Off Switch
6 Power Cord
ANGLE GRINDER
KNOW YOUR PRODUCT
1. SIDE HANDLE & GUARD
7 Pin Wrench
8 Inner Flange
9 Outer Flange
10 Metal Grinding Disc
ACCESSORIES
SETUP & PREPARATION
1
2 3 4 5
6
7
8
9
10
Adjusting the Safety Guard
Fitting the Side Handle
1 Loosen guard bolt with a
phillips head screwdriver.
3 Tighten the guard bolt to
secure in place.
1 Firmly attach the side handle
in the desired position by
rotating clockwise.
2 To remove the side handle
rotate it anti-clockwise.
The safety guard must be used at all times whilst operating the angle
grinder.
The side handle can be fitted on either side of your grinder. The correct
position will be determined by your preferred hand and the operation
being performed.
2 Rotate the safety guard into
the desired position.
