CAUTION:
THE TOOL IS RECOMMENDED FOR
USE WITH A RESIDUAL CURRENT DEVICE WITH
A RATED RESIDUAL CURRENT OF 30mA OR LESS.
AGB-1201
4. ON/OFF SWITCH
5. GRINDING & CUTTING
1 Ensure the workpiece is
securely held down.
2 Turn on the angle
grinder.
OPERATION
3 Begin grinding your workpiece. The optimum grinding
angle is 10-15
°
to the workpiece. Do not apply excessive
pressure. Allow the tool to do the work. This will prevent
deep gouging.
4 Begin cutting your
workpiece. The optimum
cutting angle is 90
°
to the
workpiece. Do not apply
excessive pressure. Allow
the tool to do the work.
Grinding
Cutting
1 Press and hold the lock-off
button down.
2 Press the on/off trigger to
start the grinder.
3 To stop the grinder, release
the on/off trigger.
The angle grinder is fitted with a lock-off button to avoid accidental
start up.
10-15°
