5 Screw the outer flange onto the spindle.
Note:
The flat surface on the flange should be in contact with
the cutting disc.
2. GRINDING DISC FITMENT
3. CUTTING DISC FITMENT
Inspect the cutting disc before fitment to ensure it is not cracked or
deformed. The cutting disc is suitable for cutting tasks only. Only
use cutting discs with a diameter of 125mm.
CAUTION:
REGULARLY CHECK THAT
THE OUTER FLANGE HAS NOT BECOME
LOOSE DURING OPERATION.
CAUTION:
REGULARLY CHECK THAT THE
OUTER FLANGE HAS NOT BECOME LOOSE
DURING OPERATION.
1 Depress and hold
spindle lock button.
2 Rotate spindle to locate
the lock position.
7 Use the above operation in reverse to remove grinding disc.
6 Depress and hold spindle
lock button. Firmly tighten
the outer flange with the
pin spanner.
3 Use pin spanner to
loosen and remove the
outer flange.
4 Insert the disc with the
label facing up.
Use ONLY the Cutting
Guard with a cutting disc.
Dang
er: D
o not
e xceed the max. safe
spe
ed
125
m
m (5
”
) Metal Cutti
ng D
i
sc
Max
1
2,000
RPM
1 Depress and hold the spindle
lock button.
3 Use the pin spanner to
loosen the outer flange.
5 Screw the outer flange onto
the spindle.
Note:
The flat side of the flange
locates against the disc.
Inspect the grinding disc before fitment to ensure it is not cracked
or deformed. The grinding disc is suitable for grinding tasks only.
Only use grinding discs with a diameter of 125mm.
2 Rotate the spindle to locate
the lock position.
4 Insert the disc with the label
facing up.
6 Depress and hold the
spindle lock button. Firmly
tighten the outer flange with
the pin spanner.
Use ONLY the Grinding
Guard with a grinding disc.
