RST-80S
4. OPERATING THE STAPLE GUN
5. TROUBLESHOOTING
1. Place the staple gun against the work surface so that the
nosepiece of the tool is where you want the staple to be located.
1. Remove the two Hex screws from the front of the staple gun
using the 4mm supplied Hex key.
2. Remove the front plate held by the two screws.
3. The jammed staple should fall out. If not, use a pair of pliers to
securely grip and remove.
4. Reassemble by placing the plate back on and tightening the two
Hex screws.
2. Push the tool firmly down on the work surface.
3. Squeeze the trigger to fire a staple.
Clearing Jammed Staples
WARNING!
ENSURE ThE TOOL IS dISCONNECTEd fROM
ThE AIR SUPPLy bEfORE PERfORMING ANy Of ThE
fOLLOWING OPERATIONS.
