IWA-2100
4. OPERATING THE IMPACT WRENCH
5. REPLACING THE FUSE
2 Select the desired forward/
reverse setting for the job.
4 Hold the impact wrench firmly
and press the on/off trigger to
start operating.
FWD
REV
1 Attach the correct
socket to the drive
shaft.
3 Place the socket
over the bolt needing
tightening or
loosening.
5 Release the on/off
trigger to stop the
impact wrench.
NOTE:
WHEN USING THE IMPACT WRENCH fOR
TIGHTENING, fIRST TIGHTEN THE bOLT OR NUT by HANd
TO PREVENT dAMAGING THE THREAd.
1 Unscrew the top of the 12V socket to expose the fuse.
The 12V socket is fitted with a 10A fuse to protect the impact wrench.
If the impact wrench has stopped working and the LED does not
illuminate, the fuse may need to be replaced.
2 Replace the 10A fuse and screw the top back onto the 12V socket.
