I
0
AC 240V ~ 50Hz
OFF
ON
AC POWER
MIN
MAX
ON
THERMAL OVERLOAD PROTECTION
ALLOW WELDER TO COOL DOWN
A
CURRENT
120A
INVERTER
ARC WELDER
Safety Precautions
• Read all safety warnings and all instructions before use. Failure
to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
• Always wear appropriate protective equipment when welding.
These include: Welding helmets, overalls, welding gloves, closed
shoes, leather apron, sock protectors. Overalls should be of type
designed to be buttoned at the wrists and the neck.
• Remove loose clothing and accessories and ensure any loose
hair is tied up or tucked away.
• Toxic gases are given off during the ARC welding process, which
may collect in the welding area. Always ensure to weld in a
well-ventilated area and use a fume extractor when required.
• The electric arc generated by the arc process gives direct
heat and ultraviolet radiation. It is essential that the eyes of
the operator and any bystanders are protected from the glare
during welding. ALWAYS use a face shield or welding helmets
fitted with the correct glass filter.
• Inspect the welder, electrode and all connecting wires for
damage / worn insulation before each use and if any damage is
found, replace the damaged parts before use.
• Used electrodes and welding material can be extremely hot
immediately after welding. Wait for the electrode and the
material to cool down before handling and always ensure
welding gloves are worn when handling electrodes and hot
materials.
• Ensure there is sufficient ventilation, particularly at the front and
rear of the unit.
• Have an adequate fire-fighting device on hand.
WARNING!
ENSURE ALL OIL, PETROL AND
FLAMMABLE CONTAINERS HAVE BEEN REMOVED
FROM THE WELDING AREA.
1. AC Power Cord
2. On/Off Switch
3. Current Control Dial
4. Negative Output Terminal
5. Positive Output Terminal
6. Digital Display
7. Power ON LED
8. Thermal Overload LED
INVERTER ARC WELDER
KNOW YOUR PRODUCT
1. BEFORE STARTING
SETUP & PREPARATION
7
8
6
5
1
9
10
11
12
2
3
4
ONLINE MANUAL
Scan this QR Code with your mobile
device to take you to the online manual.
ACCESSORIES
9. Earth Clamp
10. Arc Electrode Holder
11. Chipping Hammer/Wire
Brush
12. Welding Mask
