3. MOWING
OPERATION
1. Open the battery cover. Slide two
batteries of the same capacity
and same charge state into the
mower aligning the ribs so that
they click into place.
1. Press and hold the lock-off
button.
3. Release the start/stop lever
to stop the mower.
To prevent accidental start up, the mower is fitted with a dual action switch.
1. Open the battery cover. Press the
battery release tab and remove
the battery.
2. Insert the safety key.
(If the mower is not going to be
used immediately, do not insert
the safety key.)
2. Pull the start/stop lever
towards the handle to start
the mower and then release
the lock-off button.
3. Close the battery cover.
2. Close the battery cover.
Inserting the Batteries into the Mower
Switching On and Off
Removing the Batteries from the Mower
PXLMTS-0182
• While using your lawn mower always wear substantial closed, heavy
footwear and long trousers.
• Make sure the lawn is clear of sticks, stones, wire and debris; they could
be thrown by the blade.
• Before using the lawn mower and after any impact, check for signs of
wear or damage and repair as necessary.
• Replace a worn or damaged blade together with the blade bolt to
preserve balance.
IMPORTANT!
DO NOT MOW IN POOR VISIBILITY
CONDITIONS, IN THE RAIN OR WHEN GRASS IS
WET.
Start mowing the edge of the
lawn and work along making
sure to overlap each pass by a
few centimetres.
When mowing long grass be sure to not overload the motor. First cut with the
highest cutting
height and then
to the desired
height. This will
help reduce the
load.
Lawn Mowing Tips
Only use 2 batteries with the same capacity. For best performance use 3.0Ah
batteries and above. Always use 2 batteries with the same charge state with
the mower.
