STEP 1:
Verify Package Contents
Verify package contents by emptying contents of
bag(s) and confirming all parts are included and
undamaged. Tip: Do this at home before you leave
on your trip.
STEP 2:
Assemble Utility Room
A)
Extend all of the poles.
B)
Locate the hubs and connect the
roof pole to the hub, making sure the
R-spring is in the slot on the hub.
Repeat with all leg poles.
C)
Hook the quick clips and S-hooks
that are attached to shower to the
poles.
D)
Locate the pin-ring at the base of
the shower and put the pin into the
bottom of pole.
STEP 3:
Attaching the Rainfly
A)
Drape rainfly over shower with the
logo facing forward.
B)
Attach rainfly to poles by pulling
the S-hooks down to the D-rings on
poles. Then use the nylon fasteners
located on underside of rainfly to wrap
around poles.
STEP 4:
Stake Utility Room
A)
Stake utility room by driving stakes
through the webbing loops on base of
shower.
B)
To secure guy lines, find the guy
line plastic slider and look for the por-
tion of the line opposite the knot. Pull
this portion, forming a loop (works
like a slip knot). Extend guy line to
ground and stake. Repeat with
remaining guy lines.
STEP 5:
Installing the Shower Bag
On ceiling of utility room there is a hook to attach a
shower bag to use it as a shower. Note: Use a
shower bag 5 gallons or less in this shower stall.
ASSEMBLY INSTRUCTIONS
DISASSEMBLY INSTRUCTIONS
THIS RECREATIONAL PRODUCT REQUIRES TWO ADULTS TO ASSEMBLE.
*
Unless otherwise specified all instructions will be given assuming the assembler is facing the front opening of the shower.
*
Carefully fold out your poles, using caution to prevent snapping the shock-cording. Make sure each pole segment is “seated” into the next section
before flexing the pole during set-up.
*
Do not drop shower pole bag. Do not bounce product bag on its end to remove shower, as these actions may damage the chain-cording and/or
pole ends.
STEP 1:
Remove the Stakes
Carefully remove stakes by pulling out the hook ends.
Do not pull or tug at the stake loops sewn onto the utility
room body. Remove excess soil from the stakes and
store them in their bag.
STEP 2:
Remove Rainfly
A)
Unfasten S-hooks that hold rain fly down.
B)
Detach the nylon fasteners.
C)
Fold rainfly for storage.
STEP 3:
Take down Utility Room
A)
Unclip the quick clips and S-hooks on roofline.
B)
Remove the pins from the pole ends at the bottom
of the utility room.
C)
Pull the poles out of the hub and collapse poles.
STEP 4:
Fold the Utility Room
Fold utility room into rectangular shape the width of pole
bag. Lay pole bag at one end of utility room and roll
tightly together, slowly squeezing air out as you go. You
can roll rainfly together with utility room in one step.
Store utility room in carry bag provided (following these
instructions will make it easier to fit utility room into bag.)
* Make sure all windows and doors are unzipped to disassemble.
* Store all poles and stakes in their corresponding bags to prevent possible tearing or damage to fabric.
CAMPERS WANT TO KNOW
Why are there straps with buckles hanging
inside my shower?
Straps are provided to help secure your solar
shower unit’s hose. By squeezing the sides of
the quick release buckles, you can easily open
the straps; slip the hose through the strap, then
close the buckle. Adjust each strap to secure the
hose along the side walls.
Summary of Contents for 88-97-07 Utility Room
Page 1: ......
