manualshive.com logo in svg

OZAK VP-125, Assembly, Installation And Maintenance Handbook

The OZAK VP-125 Assembly, Installation And Maintenance Handbook is a comprehensive manual designed to assist users in effortlessly setting up and maintaining their VP-125 model. With easy-to-follow instructions and valuable insights, this manual is available for free download on our website. Get your copy today to ensure a seamless installation experience.

Share
Download
background image

4

KK-1302-0001 R(11) 

29.03.2022

2. SAFETY AND OPERATION 

2.1 Safety Warnings and Symbols 

2.2 Power Supply Fuse

For Safety and proper operation of the turnstile, all installation and repair work must be performed by qualified 

technical personnel only!  

HIGH VOLTAGE WARNING LABEL

 SE

Gnd.

P

N

WARNING / DİKKAT

220 V. 50 Hz.

WARNING !

Never remove the protective cover of the 

power supply unit for any reason!

Observe the warning signs, power and 

fuse values when performing any work 

on the turnstile. Warning labels and 

power supplies may vary depending on 

the turnstile model and type

GROUNDING SYMBOL

G

Gnd

nd ..

PP

N

N

POWER CONNECTOR FRONT VIEW

Use only the same type and rating of fuse as selected by 

the manufacturer!

The fuse and a spare are located inside AC power socket

Spare Fuse

24 V DC POWER SUPPLY

FU

Summary of Contents for VP-125

































Reviews:

No comments

Related manuals for VP-125

Brands by name

Popular brands

Load more brands