22
KK-1302-0001 R(11)
29.03.2022
TRN2101
Control Board
/ GLA, DDA G
ates
W
ing
P
osition
S
ettings
1
Prog Reset
Wing Position Settings-Centre Position
3
4
Wing Opening Stop Positions- Left
LLLLLLLlLeftLeft
POZİSYONLARI
AYARLAMA
Wing Opening Stop Positions- Right
5
6
Manually open the wing to right stop position. Press and
quickly release the
‘
PROG
’
button. Warning tone
indicates that right side arm opening stop position is
saved.
Note:
Three beeps indicate that the wing open
position was already adjusted.
Manually open the wing to left stop position. Press and
quickly release the
‘
PROG
’
button. Warning tone indicates
that left side arm opening stop position is saved.
Note:
Three beeps indicate that the wing open position was
already adjusted. In this case move on to the next setting.
7
+
+
+
+
+
+
+
+
+
+
+
TRN2101 Control PCB
‘
Prog
’
and
‘
Reset
’
buttons.
System Reset and Service/ Adjustment Mode
2
Single Button Setting Mode
SERVİS MODU
Press and release reset button. Press and hold
‘p
rog
’
Button while system
reset buzzer warning is on. Release
‘
prog
’
Button when rapid beep is heard.
This activates manual command service mode. (See fig.3)
Press PROG button again and
release when very rapid
warning tone is heard.
geldiğinde bırakınız.
Manually bring wing in centre position; Press and release
‘
PROG
’
button quickly. Warning tone indicates that the arm centre position
is saved.
Exiting Service Mode
Press and release
‘
RESET
’
button
to exit service mode. Gate returns
to normal operating mode.
2
