USER MANUAL Model No: 3140
Assembly Steps:
1. Plastic Base To Base Pole
Pick up the Base Pole (identified by the
warning label), unscrew the Plastic Grip
Bolt and then slot the pole into the
designated hole at the front of the Plastic
Base. Using the Plastic Grip Bolt; tighten
the bolt top secure the Base Pole in place,
ensuring the warning label is facing
outwards as this is what will determine the
direction of the net.
2. Securing the Base Pole To The Plastic Base
Get the two Metal Support Tubes and line them up
with both the hole in the Plastic Base and the two
side holes on the Base Pole. Note that they are both
slightly different so ensure you use the support tube
with the correct angle on the correct side. Using a
Plastic Grip Bolt (Medium M8X15) and a Plastic Grip
Nut for each Support Tube, attach the Support
Tubes to the Plastic Base. Ensure that it is not too
tight at this stage as it may require slight adjustment
in the second part of this step.
NOTE: You will need to use a bit of force to get the
support tubes into position, this is to build the
tension needed to keep the product stable once
fully assembled.
Get the Plastic Grip Bolt (Long M8X60) and the final
remaining Plastic Grip Nut and slide this through one
of the Metal Support Tubes, through the Base Pole
and then through the second Metal Support Tube.
Tighten both this connection and the Metal Support
Tubes connection to the Plastic Base to ensure a
sturdy construction of the Netball Post. You may
find it easier to tighten the top bolt before the lower
base bolts.
