32
- ventilation intensity setting control
operating state -
air filter replacing indicator -
failure indicator -
Press the RESET button. The Unit will restart and if the failure was resolved, will continue to operate.
If the problem with failed component will persist after the Unit reset procedure has been performed
and RESET button will reappear, contact manufacturer of the Unit or its local representative.
You may control the Unit by app installed on smartphone or tablet by purchasing the WiFi controller.
9.3.
Control panel with a knob
Control panel with a knob makes it possible to gradually control the ventilation intensity. Colored
LEDs indicate status of the Unit.
Figure 26. Control panel with a knob
9.3.1.
Operating state indicator
Flashing green led indicates that the Unit is connected to power supply:
flashes 1 time
ventilation is off
flashes 2 times
ventilation is on
flashes 3 times
the Unit is shutting down