Rev.0 LEPTON
Service
manual
OXYGEN S.p.A.
29
Figure 11/b
If the LEPTON throttle does not achieve the maximun speed, you need to check the
correct tension of the connection wire (Figure 11/a):
•
Dismantle the front shield;
•
You have to turn a throttle at the maximum rotation point, then check that
the maximum position of the throttle coincides to the maximum position of
the potentiometer braket;
•
Do the same test again with the LEPTON turning ON, taking care that the
LEPTON is leaving on the stand. Check that the LEPTON could achieve
the maximum speed.
•
You can set the stretch of the wire by the 2 set screws (Figure 11/b).
•
Block the 2 set screws and mount the shield.
