RT-Base S User Manual
Revision: 151112
27
Figure 17. NAVbase Status page
To view the live status, select the IP address of an RT-Base S on the Settings page, then click Next.
As well as providing visual feedback on the state of the system, the Status page is also
used to control the file management of the RT-Base S. The data being logged to the
internal storage system can be restated by clicking the Restart logging button, while the
currently logged data can be retrieved using the Retrieve data button.
Position manager
The RT-Base S uses a specified position or an averaged position to create its
corrections. The Position manager within NAVbase allows you to manually add
locations and upload them to the RT-Base S when connected via Ethernet. It is also
possible to force the RT-Base S to start using a location from the Position manager.
The main interface of the Position manager is shown in Figure 18. To add a new
position, select the Add new position button. The New position window opens, where a
unique name, latitude, longitude and altitude can be entered. Lat/Lon measurements
should be entered to no fewer than eight decimal places. Existing positions can also be
loaded via the New position window, by selecting Load from file, and navigating to the
desired file.
