User Manual -
TBOX G2
V1
03/2017
19/24
• Turn the jog wheel to scroll through the options to set the TX start code, RX start code, Auto
lndentify, 16bit Format, Format, Contrast level, Backlight Off, Auto Mask Oevice, DMX Output
When RDM or DMX Output Level Language Software version.
- TX Start Code: Set the starting value for DMX signal transmission. The adjustment range is
between 0-255.
- RX Start Code: This code is needed when you want to use another RDM tester as
transmitter. Both devices have to setup with the same code. lt is set by default to 000. The
adjustment range is between 0-255. If you choose Ali, the device will be able to receive all
start codes.
- Auto ldentify: Select Auto or OFF. If you have chosen Auto, the connected fixture will send
an identification order to the TBox G2 in the Get&Set RDM function. If you have chosen OFF,
the connected fixture will not send any identification order.
- 16bit Format: This function con be chosen if you select a l 6 bit fixture in the Color Demo
or Chase Demo mode. You con choose between two types of controlling, MSB first or LSB
first.
MSB: Most Significant Bit (Coarse first) and LSB: Least Significant Bit (Fine first).
- Format: Select the display format, Decimal, Percents, BAR (square) or Hexadecimal.
- Contrast Level: Set the contrast of the display. The adjustment range is between l 0-100,
from low to high contrast.
- Backlight Off: The display will turn off when no button is pressed. You con set the time
between 30 sec, l min, 2min, 5min, l 0min or 30min.
- Auto Mask Device: Select ON or OFF. If you choose ON, the connected RDM device will not
appear in the overview. When you set its starting DMX address, the other devices without
DMX address will appear in the overview. If you choose OFF the connected RDM device will
appear in the overview.
- DMX Output When RDM: Select ON or OFF. If you choose ON, you con keep sending DMX
signals together with ROM. If you choose OFF DMX signais will not be sent together with RDM.
- DMX Output Level: Adjust the max. DMX output level between 0-255, when you choose DMX
Output When RDM= ON.
• Language: Allow you to choose between English and French language
• Software version: Give you the version of the software
• Press the jog wheel to activate an option.
• Turn or press the jog wheel to adjust the desired option.
• After adjusting the desired option turn the jog wheel to select OK&Save, the display shows:
Summary of Contents for T BOX G2
Page 24: ......
