User Manual -
TBOX G2
V1
03/2017
10/24
• Select Chase Effect Mode in the DMX 512 Send menu, the displays shows:
Chase Effect Mode
<EXIT>
Start Chan: 001
Master: 255
Pixel Type: 8Bit-1Color
Total Pixel: 250
Effect width
Effect step
• You con adjust the starting channel, master level, the pixel type, total pixel, pixel group, jump
pixel, Test Color, Speed level or Fade time.
- Start Channel: Set the starting address of the first fixture, between 001-512.
- Master: Set the maximum value of the DMX output, between 0-255.
- Pixel Type: You con either select an 8-bit or 16-bit fixture {each consists of 9 colors).
- Total Pixel: Set the range, between 001-512.
- Effect width: Set the number of fixtures, within the range set in Total Pixel.
- Effect step: Set the number of fixtures, which switch within the range set in Effect width.
- Test Color: Set the fixture functions, which you want to test.
- Speed level: Set the data speed, between level 0-10 or ma nuai.
- Fade lime: Set the data fade time ratio, between 0-100%.
• Select Exit to return to the previous submenu. Press the jog wheel to confirm.
• Select Exit again to return to the main menu. Press the jog wheel to confirm.
2. RDM
With this menu you can obtain info about the connected fixture and you can also control the
fixture.
• Turn the jog wheel to select RDM Data Test in the main menu.
• Press the jog wheel to open the menu.
• The display shows:
RDM
...GET & SET RDM
...Update RDM Device
...Exit
Summary of Contents for T BOX G2
Page 24: ......
