User Manual -
Mistral 24
V1.2 05/2015
26/52
Dimmer Display
• The 3-Digit Segment Display is used to display intensity percentage or absolute DMX value.
• To change between percentage and absolute value: Press and hold the Shift Button. While
holding down the Shift button press the % or 0-255 Button to switch between percentage and
absolute values.
• If the Segment Display reads, for example, «076», it means a percentage value 76%. If the
Segment Display reads «076.», it means the DMX value 76.
Blind and Home
• Blind function takes channels temporally out from a chase, when the chase is running, and
gives you manual control over the channel.
• Press and hold the Blind Button and tap the relative Flash Button you want to temporarily
take out of the chase.
• To return to normal chase again press and hold the Home Button and push the Flash Button
you want to return to normal chase.
Park
• In CHNS SCENES Mode, press down the button you can change the chasing mode of pro-
grams between Single Mode and Mix Mode.
• In Double Preset Mode, pressing down this button is equal to pushing Master Slider B to the
top.
• In Single Preset Mode, this button could temporally record current output, with Master Slider
B to adjust.
Add and Kill
The ADD/KILL Button changes the mode of the flash buttons. Normally the flash buttons are
in Add mode, whereas pressing any flash button will not kill other scenes, allowing multiple
scenes to be on at a time.
The Kill mode is activated by pressing the Add/Kill button and illuminating the LED above it.
Pressing any flash button will kill other active SCENE or Program.
In Kill Mode, the killed program does not stop running but can not output.
