OXO FUNSTRIP 2R, User Instruction, Page: 7 / 10

User Manual - Funstrip 2R V1 03/2017 7/10
Chase Mode:
Use the operation mode only when you are about to use your unit as a channel chaser among
of the 01, 02, 05, 10, 15 channel chasers. The unit has 16 built-in programs except for Auto
and Full. Of course, you can select any of these programs to chase for a more dramatic lighting
show, and you can also control the speed at which the set programs will be chased.
1. Selecting the Chase Mode:
Chase Mode is indicated by «P» fol-
lowed by two digits. «P «stands for Chase program and means the
Chase Mode has been activated at present, and you have also ac-
tivated the Chase Program Mode. After activating the Chase Mode,
the Chase Program Mode starts initially and is the default setting.
If»A»appears in the LED display, means you are in the DMX mode. «A»
stands for DMX address.
Of course, the mode switch can immediately realize on your fingerti-
ps by tapping the «MODE» button.
P:01
2. Setting your desired Chase Program: Once you have activated
the Chase Mode as in step1, you can use the «UP» and «DOWN»
arrow button to change your selected chase program. The chase
pattern is displayed in the LED by «P» followed by two digits01~16
or only «AUTO» & «FULL» appears. You can select any of them to run
at a single time.
P:01
3. Selecting the Chase Speed Mode: To adjust the Chase Speed,
you must activate the Chase Speed Mode. Of course, only while in
the Chase Mode as step 1, press and hold the «MENU» button until
«SP» followed by two digits appears in the LED. «SP»stands for the
chase speed.
SP:01
4. Setting your desired Chase Speed: In this mode, you can adjust
the program chase speed. Use the « UP « and «DOWN» arrow buttons
to adjust the chase speed from 01thru 99. A set value of 99 will give
you the fastest chase speed(approx.1/10th of a second) .
While a set value of 01 will give you the slowest chase speed (once
every 30 second.).
SP:01
5. Selecting the Intensity(Dimming) Mode:
To adjust the output in-
tensity, you must activate the Chase Dimmer Mode. Of course, only
when in the Chase Mode as in step 1, press and hold the «MENU»
button until « d» followed by three digits appears in the LED. «d»
stands for the chase dimmer.
D:000