OXO FUNSTRIP 2R User Instruction Download Page 2

User Manual -

 Funstrip 2R

V1

03/2017

2/10

1. In the box

• 1 Funstrip
• 1 The unit power cable
• 2 Wing screw + 2 G 2 Washer
• 2 Mounting Assemble

2. Instructions

WARNING

Read the instruction in this manual carefully and thoroughly, as they give important informa-
tion regarding safety during use and maintenance. Keep this manual with the unit, in order to 
consult it in the future. If the unit is sold or given to another operator, make certain that it always 
has its manual, to enable the new owner to read about its operation and relative instructions.

Protect the unit from excessive dryness or humidity (ideal conditions are between 35% and 
80%).
To prevent fire or shock hazard, do not expose this product under a high temperature or humi-
dity area.
DO NOT make any inflammable liquids, water or metal objects enter the unit.
Should any liquid be spilled on the unit, DISCONNECT the power supply to the unit immediately.
This product must be earthed.
Take care not to damage the power cord.
After having removed the packaging check that the unit is NOT damaged in any way. If in doubt, 
DON’T use it and contact an authorized dealer.
NEVER use the unit under the following conditions:
- In places subject to excessive humidity.
- In places subject to vibrations or bumps.
- In places with a temperature of over 45 C/113 F or less than 2 C/35.6 F.
DO NOT open the unit--there are no user serviceable parts inside.
NEVER try to repair the unit yourself. Repairs by unqualified people could cause damage or 
faulty operation. Contact your nearest dealer.
Wait for at least one second to turn on the power after turning off this unit.
This unit is intended for indoor use only.
Packaging material (plastic bags, polystyrene foam, nails, etc.) MUST NOT be left within child-
ren’s reach, as it can be dangerous.
STOP using the unit immediately In the event of serious operation problems and either contact 
your local dealer for a check or contact us directly.
DO NOT dismantle or modify the unit.
If in doubt, DON’T use it and contact an authorized dealer.

Summary of Contents for FUNSTRIP 2R











Reviews: