Oxidation Technologies OA-1 Installation And Operation Manual Download Page 2

Cautions, Warnings and Hazards for working with ozone.

Refer to the manual of the ozone generating system first, to assure proper location of all
ozone equipment.

Ozone is a powerful oxidizing agent.  Observe strict operating procedures when using 
ozone equipment.

Ensure that the ozone system is in a well-ventilated area.  The OA-1 Ozone Alarm must 
be used indoors mounted 5-6 ft. from the floor.

Note:  If the operator has asthma, he/she must not enter an ozonated airspace.

Ozone can induce an asthma attack.

Carefully review and familiarize yourself with the following important safety information 
statements concerning the use of ozone.

WARNING

Ozone is an extremely aggressive and powerful oxidizer. The 
Occupational Safety and Health Administration (OSHA) 8-
hour exposure limit is 0.10-PPM. The OSHA 15-minute 
exposure limit for ozone is 0.3 PPM.  Above 0.3 PPM, there is
the risk of damage to respiratory tissues.

WARNING 

People who have no sense of smell should not operate this 
equipment.

WARNING

 

Never

 attempt to verify ozone production by directly breathing

or smelling the ozone outlet or an ozone-tubing outlet.

WARNING

 

Make sure all tubing connections between the ozone 
generator and the injection point are secure and in good 
working condition.  Failure to do so could result in the 
discharge of undesired ozone into an occupied space.

Page 2

214 West Highway 18

Inwood, IA 51240

PH: (515) 635-5854

Summary of Contents for OA-1











Reviews: