3.2.2 Steps of installation:
STEP 1
Locate the wall or impending base level that can support 5 times the weight of camera. Fix the bulgy snail
Φ
8mm on the floor or firm surface.
STEP 2
If the power supply box is needed, fix the power supply box on the wall firstly, then fix the wall bracket on the
power supply box; If the power supply box is not needed, then fix the wall bracket on the wall directly.
STEP 3
Put power supply, video output, RS485 control input wiring through waterproof connector plugs, and connect
them correspondingly to power supply, video, RS485 wiring of the connecting cable.
Connect the cable refer to the following picture
