ZOOM TELE
1.Press the ZOOM TELE button or turn the joystick anti-clockwise
until you have the picture you want
2.release the button or joystick
IRIS OPEN
Continuously press key OPEN to open iris and increase brightness
gain
IRIS CLOSE
Continuously press key CLOSE to close iris and increase brightness
gain
FOCUS NEAR
Continuously press key NEAR, focus become near from far, the
image becomes fog from clear or becomes clear from fog.
FOCUS FAR
Continuously press key FAR, focus become far from near, the image
becomes fog from clear or becomes clear from fog.
PRESETS
1. When set presetting, press “preset No.”+ key ”PRESET”(about
for 3 seconds)
2. When use presetting, press “preset No.”+ key ”PRESET”
3. Please refer to operation instruction book for controller.
Wiper Control
Preparation:
1, Press preset 95 to enter into OSD menu.
2, Enter WIPER in AUX menu , there will be three kind of wiper
running option: single mode, linkage mode, circle mode.
Way 1:
Presse preset 77 to set it “ON”, wiper stops after 60 seconds, wiper
stops if pressing preset 78 to set it “OFF” within 60secs
Way 2:
Use Pelco keyboard or UV900-KBD keyboard, press “1”+”ON” to set
wiper “ON”, wiper stops after 60 seconds, wiper stops if pressing
“1”+ “OFF”to set it “OFF” within 60secs
IR Lamps Control
Way 1:
1, Enter into menu by pressing preset 95
2, Enter INFRARED in the AUX menu. ON means open IR, it will
starts work when the illumination is lower than ILUX. OFF means
close IR.
Way 2:
Pressing Preset 75 to set it “ON”, pressing preset 76 to set it “OFF”
Way 3:
Use Pelco Keyboard or UV900-KBD, pressing “2”+ “ON” to set IR
lamps ON, pressing “1” + “OFF” to set IR lamps OFF.
