oxic XD-S16200, User Manual

Page: 85 / 142

85
85
4.5.2 Alarm Out Enable
Main Menu Æ Alarm/Motion Setup Æ Alarm Input & Output Æ Alarm Out
Enable
Figure 4.5.2: Alarm Out Enable.
1. Alarm Out Enable
Use this table to specify which alarm out or relay should be triggered. When
channel is alarm in or motion, alarm out will be sent.
: Output enable.
Blank: Output disable.
Example (Fig 4.5.2):
(1) When channel 1 is motion detected or alarm in, relay and alarm-out 1 are
triggered.
(2) When channel 2 is motion detected or alarm in, relay and alarm-out 2 are
triggered.
(3) When channel 3 is motion detected or alarm in, relay and alarm-out 3 are
triggered.
(4) When channel 4 is motion detected or alarm in, relay and alarm-out 4 are