oxic XD-S16200, User Manual

Page: 126 / 142

126
126
Chapter 6 Trouble Shooting
6.1 Installation
6.1.1 The DVR is not power on
Please verify that the AC power cord is connected properly to an AC outlet and
the DVR.
If the DVR is connected to a switch outlet on another unit, verify that unit is
powered on.
6.1.2 Power is on, but the DVR dose not operate
Please verify that the RS-485 cable is connected properly to the DVR and the
Multi-keyboard.
Please check if the 8 LEDs lights of the keyboard are on, which means the
keyboard “LOCK” function is active. Please press “LOCK” key on the
Multi-keyboard for 3 sec to release the “LOCK” status.
6.1.3 Images are not showing on the monitor
Please verify if the monitor and the camera(s) are connected correctly.
Verify that the BNC/VGA switch is set to confirm with the monitor.
6.1.4 The picture quality on the monitor is poor
Please check if the connectors are connecting correctly.
Verify that the NTSC/PAL switch is set suitably.
Please check if the camera focus is adjusted properly.