oxic XD-S16200, User Manual

Page: 25 / 142

25
25
2.5 Network Installation
2.5.1 Connect with DVR
Use RJ-45 port on the DVR’s rear panel to connect with network. Network
function provides user to remote view the DVR’s image on a PC by the
NetView application. To install the Network for DVR, please insert the LAN
cable into RJ-45 port on the DVR rear panel.
LAN Connector
1234 5678
LED1 LED2
The pin-out of the RJ-45 jack is the same as a standard
Ethernet UDP jack.
LED1: YELLOW LIGHT Indicates the MESSAGE
Transaction.
LED2: GREEN LIGHT Indicates the LAN PORT ON LINE.
2.5.2 Setup LAN Configuration in DVR Main Manu
1. Go to the path: Main Manu
Æ Installer Setup Æ LAN
Figure 2.5.2: LAN Configuration
2. Use and Encoder ( ) to set IP, Mask and Gateway values.
Note : The numbers of IP, Mask and Gateway in Figure 2.5.2 is an example. To
set LAN configuration, users need to contact their local internet provider or the
company network administrator for correct information.